Call Us: 866-701-1146

mobile-logo
0
  • No products in the cart.
 

Medium Range Legacy System

Medium Range Legacy System

The Medium Range Legacy System consists of a two-input transmitter and a two-output (12 VDC) receiver. The MRWSS comes complete with power supplies, relays, and antennas. Simply make your connections and the System is ready for use and guaranteed to perform.

  • 27 MHz FM Radio Signal
  • Up to 2 Miles of Range
  • 2 Dry Contact Inputs and Outputs
  • 2 12VDC relays rated to switch 6 amps at 250VAC or 30VDC
  • Includes: High Gain Antennas, Antenna Mounts, Coax Cable
  • NEMA 4x Plastic Enclosure

Operation is simple: connect a switch or any device with a dry contact closure to the transmitter inputs (terminal block). When a contact is closed, the transmitter will immediately send an “ON” transmission to the receiver, activating the selected relay output. The receiver relay outputs are rated at 6A up to 240VAC or 30VD. Immediately after a contact is opened, the transmitter will send an “OFF” transmission to the receiver, deactivating the receiver relay output and turning off the connected device.

Operating Environment
  • Indoor or Outdoor
  • -40 degrees F to 140 degrees F

Solar Panel Systems:

Solar Panel Kits:

Turnkey, 12 VDC solar panel kits are available for locations without electricity

10 & 20 Watt Solar Power Kits

The Remote Control Technology 10 W and 20 W Solar Power Kits are complete, fully integrated power sources utilizing the latest remote technologies and are designed to provide 12 VDC. Each system provides safe and reliable power generation without the need and expense of installing utility power. The sealed, maintenance-free battery is designed for deep-cycle operation and extended life in solar power applications. The support structure and battery enclosures are strong, lightweight, and corrosion resistant, making them ideal for harsh marine locations or severe weather locations.

For Solar Power Kits greater than 20 Watts or for compatibility with systems not listed, call us today at 866.701.1146.

Features and Benefits:

Solar modules are fully encapsulated to resist harsh conditions

  • Low voltage load disconnect for battery protection
  • Sealed, lead-acid battery designed for deep discharge cycling
  • Corrosion resistant control/battery enclosure
  • Outstanding low-light performance
  • Heavy-duty annodized frames
  • Temperature compensated battery charging
  • Solid state electronics for improved efficiency and reliability
  • Pre-assembled, pre-wired systems to minimize installation time and eliminate wiring errors
  • Low maintenance and operating cost
  • Complete systems reduce specifying and buying time
  • Full system and performance warranty available on prepackaged systems

20 Watt Solar Power Kits

Part #: 09162

Recommended for use with:
  • Medium Legacy System
  • Long Range Legacy System
  • Long Range Handheld System
  • Wireless Multi-Switch Controller

10 Watt Solar Power Kits

Part #: 09163

Recommended for use with:
  • Short Range Legacy System
  • Short Range Advanced Handheld System

MRWSS Transmitter Part #: 01242

Mounted in plastic, NEMA 4X enclosures, the Medium Range Legacy System is designed for outdoor/indoor industrial wireless controls applications. Remote Control Technology offers a one-year warranty for this system. The transmitter has an output power of 2 watts @ 26.995 MHz. The potential range is approximately 2 miles* and, with proper antenna application, is not limited to line of sight.

Includes:
  • 2-input, 2-watt radio transmitter
  • 15 watt power supply (110 VAC to 240 VAC input, 12 VDC output)
  • NEMA 4X plastic enclosure
  • 42” high-gain antenna
  • right-angle antenna mount
  • 25’ coaxial cable w/ BNC connectors
Power Requirements:
  • Supply Power: 12 VDC (15 W power supply included)
  • XMIT Current: 200 mA
  • STBY Current: 35 mA
Radio Output:

2 watts (2 mile* potential range)

  • Frequency: 26.995 FM
  • Format: PDTFM FSK
  • FCC Part 95 Subpart E compliant (no license required)

*The range of all radio products is dependent on local conditions and antenna selection and placement.

MRWSS Receiver Part #: 01241

Includes:
  • 2 output receiver
  • 15 watt power supply (110 VAC to 240 VAC input, 12 VDC output)
  • NEMA 4X plastic enclosure
  • 42” high-gain antenna
  • right-angle antenna mount
  • 25’ coaxial cable w/ BNC connectors
Power Requirements:
  • Supply Power: 12 VDC (15 W power supply included)
  • Output Current: 1 amp per output
  • STBY Current: 45 mA
Radio:
  • Frequency: 26.995 MHz FM superheterodyne FM Receiver
  • FCC Part 15 compliant (no license required)

*The Range of all Radio products is dependent on local conditions and antenna selection and location.

The Medium Range Legacy System is designed for medium range (up to 2 miles*) and simple wireless control switching. The System is the simple solution for wireless control applications where faulty wire replacement or new installation is not possible or practical. Possible applications include: