Long Range Wireless Switch System

Part #: 01210

The Long Range Wireless Switch System (LRWSS) is an industrial wireless remote control designed for long range (up to 5 miles*) and simple wireless switching. The LRWSS is the simple solution for applications where faulty wire replacement or new installation is not possible or practical.

The LRWSS consists of a six-input transmitter and a six-output (12 VDC) receiver.

It comes complete with power supplies, relays and antennas; all you need to do is connect the devices you want to control, and the LRWSS is ready for use and guaranteed to perform.

Possible applications include:

Operation

Operation is simple: connect a switch or any device with a dry contact closure to the transmitter inputs (terminal block). When a contact is closed, the transmitter will immediately send an “ON” transmission to the receiver, changing the state of the selected receiver output from 0 VDC to 12 VDC @ 1 amp. The receiver output can be used to activate a relay, solenoid, or light. Immediately after a contact is open, the transmitter will send an “OFF” transmission to the receiver, changing the state of the selected output from 12 VDC to 0 VDC and turning off the connected device.

Operating Environment

  • Indoor or Outdoor
  • -40 degrees F to 140 degrees F

Long Range Wireless Transmitter

Part #: 01217

Mounted in metal NEMA 4X enclosures, the LRWSS is designed for outdoor/indoor industrial applications. Remote Control Technology also offers a three-year warranty for this system. The transmitter has an output power of 4 watts @ 26.995 MHz. The potential range is approximately 5 miles* and, with proper antenna application, is not limited to line-of-sight communication.

Includes:

  • 6 input, 4 watt radio transmitter
  • 15 watt power supply (110 VAC to 240 VAC input, 12 VDC output)
  • 42” high-gain antenna
  • Right-angle antenna mount
  • 25’ coaxial cable w/ BNC connectors

Power Requirements:

  • Supply Power: 12 VDC
  • Power Supply Included
  • XMIT Current: 200 mA
  • STBY Current: 35 mA
  • Solar Panel Kits: Turnkey, 12 VDC solar panel kits are available for locations without electricity.

Radio Output: 4 watts

  • Range: 5 mile* potential
  • Frequency: 27.255 FM
  • Format: PDTFM FSK
  • FCC Part 95 Subpart E compliance
  • (no license required)

Long Range Wireless Receiver

Part #: 01216

Includes:

  • 6 output receiver
  • 15 watt power supply (110 VAC to 240 VAC input, 12 VDC output)
  • NEMA 4X enclosure
  • 42” high-gain antenna
  • Right-angle antenna mount
  • 25’ coaxial cable w/ BNC connectors
  • 2 Class C Relays Rated 6A @ 250V

Power Requirements:

  • Supply Power: 12 VDC
  • 15 W Power Supply Included
  • Output Current: 1 amp per output
  • STBY Current: 45 mA

Radio Frequency:

  • 26.995 MHz FM Superheterodyne FM receiver
  • FCC Part 15 Compliance
  • (no license required)

*The range of all radio products is dependent on local conditions and antenna selection/location.

Print Friendly