Call Us: 866-701-1146

mobile-logo
0
  • No products in the cart.
 

Long Range Legacy System

Long Range Legacy System

The Long Range Legacy System is an industrial wireless remote control designed for long-range (up to 5 miles*) and simple wireless switching. The System is the simple solution for applications where faulty wire replacement or new installation is not possible or practical and consists of a six-input transmitter and a six-output receiver.

It comes complete with power supplies, relays, and antennas; all you need to do is connect the devices you want to control, and the units are ready for use and guaranteed to perform.

  • 27 MHz FM radio signal
  • Up to 5 miles of range
  • 6 discrete Inputs and Outputs
  • Includes: high-gain antennas, antenna mounts, coaxial cable
  • NEMA 4X plastic enclosures
  • 4 Watts

Operation is simple: connect a switch or any device with a dry contact closure to the transmitter inputs (terminal block). When a contact is closed, the transmitter will immediately send an “ON” transmission to the receiver, activating the selected relay output. The receiver relay outputs are rated at 6A up to 240VAC or 30VD. Immediately after a contact is opened, the transmitter will send an “OFF” transmission to the receiver, deactivating the receiver relay output and turning off the connected device.

Operating Environment
  • Indoor or Outdoor
  • -40 degrees F to 140 degrees F

Long Range Wireless Transmitter Part #: 01217

Mounted in plastic NEMA 4X enclosures, the Long Range Legacy System is designed for outdoor/indoor industrial applications. Remote Control Technology also offers a one-year warranty for this system. The transmitter has an output power of 4 watts @ 26.995 MHz. The potential range is approximately 5 miles* and, with proper antenna application, is not limited to line-of-sight communication.

Includes:
  • 6 Input, 4 Watt radio transmitter
  • 15-watt power supply (110 VAC to 240 VAC input, 12 VDC output)
  • 42” high-gain antenna
  • Right-angle antenna mount
  • 25’ coaxial cable w/ BNC connectors
Power Requirements:
  • Supply Power: 12 VDC
  • Power Supply Included
  • XMIT Current: 200 mA
  • STBY Current: 35 mA
  • Solar Panel Kits: Turnkey, 12 VDC solar panel kits are available for locations without electricity.
Radio Output: 4 watts
  • Range: 5 miles* potential
  • Frequency: 26.995 FM
  • Format: PDTFM FSK
  • FCC Part 95 Subpart E compliance
  • (no license required)

* The Range of all Radio products is dependent on local conditions and antenna selection and location.

Long Range Wireless Receiver Part #: 01216

Mounted in plastic NEMA 4X enclosures, the Long Range Legacy System is designed for outdoor/indoor industrial wireless controls applications. Remote Control Technology offers a one-year warranty for this system. The transmitter has an output power of 4 watts @ 26.995 MHz. The potential range is approximately 5 miles* and, with proper antenna application, is not limited to line of sight.

Includes:
  • 6 Output radio receiver
  • 15 watt power supply (110 VAC to 240 VAC input, 12 VDC output)
  • NEMA 4X plastic enclosure
  • 42” high-gain antenna
  • right-angle antenna mount
  • 25’ coaxial cable w/ BNC connectors
Power Requirements:
  • Supply Power: 12 VDC (15 W power supply included)
  • XMIT Current: 200 mA
  • STBY Current: 35 mA
Radio:
  • Frequency: 26.995 FM
  • Format: PDTFM FSK
  • FCC Part 95 Subpart E compliant (no license required)

* The Range of all Radio products is dependent on local conditions and antenna selection and location.

Possible applications include: