Long Range Handheld Wireless Control Switch

Control anything from conveyors to pumps from a distance of up to 2 miles away

The Long Range Wireless Switch System Handheld (LRWSSHH) is designed for long range wireless industrial control and simple wireless switching. In applications where faulty wire replacement or new installation is not possible or practical, the LRWSSHH is the simple solution for:

The LRWSSHH consists of a 12 key hand-held transmitter and a six-output (12 VDC) receiver. Complete with power supply, relays and antennas. Simply make your connections and the LRWSSHH is ready for use and guaranteed to perform.

Operation

Operation is simple: select the receiver output number you wish to activate, enter it on the keypad and press the “ON” key. The transmitter will immediately send an “ON” transmission to the receiver, changing the state of the selected receiver output from 0 VDC to 12 VDC @ 1 Amp. The receiver output will then be used to activate the attached external 12VDC relay. Immediately after pressing the “OFF” key, the transmitter will send an“OFF” transmission to the receiver, changing the state of the selected output from 12 VDC to 0 VDC, deactivating the attached external relay.

Solar Panel Kits:

Turnkey, 12 VDC solar panel kits are available for locations without electricity.

Operating Environment

  • Indoor or Outdoor
  • 32 degrees F to 122 degress F

LRWSSHH Transmitter

Part #: 01218

Includes:

  • Rugged Handheld Aluminum Enclosure
  • 2-Watt Radio Transmitter
  • 9 VDC Battery
  • 8” Whip Antenna
  • Belt Clip

Power Requirements

  • Supply Power: 9 VDC alkaline battery
  • XMIT Current: 600 mA
  • STBY Current: 1 mA

Radio Output: 2 Watts

  • Range: 2 mile potential
  • Frequency: 27.255 MHz
  • Format: PDTFM FSK
  • FCC Part 95 Sub part E compliant (no license required)
handheld wireless industrial control

LRWSS Receiver

Part #: 01216

Includes:

  • 6 Output Receiver
  • 15-Watt Power Supply (110 VAC to 240 VAC Input, 12 VDC Output)
  • NEMA 4X Enclosure
  • 42” High-gain Antenna
  • Right-angle Antenna Mount
  • 25’ Coaxial Cable w/ BNC Connectors

Power Requirements

  • Supply Power: 12 VDC
  • (15 W power supply included)
  • Output Current: 1 amp per output
  • STBY Current: 30 mA

Radio

  • Frequency: 27.255 MHz
  • Superheterodyne FM Receiver
  • FCC Part 15 compliant (no license required)
Print Friendly